HVAC systems are the reason for the well being of us in our homes, duct cleaning is important so as to see that the functioning of the HVAC systems is carried on easily and smoothly. Sometimes our HVAC systems do not give out heat as they should and they also do not do the ventilation as they should, chances are there must be a hole or loose connection in your duct.
To actually know whether you need to seal your ducts you will have to check for any opening in the ducts.
In this blog, Toms duct cleaning Melbourne will let you know if your HVAC systems to do heated duct sealing.
Other reasons to see if your ducts need cleaning are as follows:
- The HVAC system is not regulating the temperature of your house properly
- Your bills are high over the summer seasons.
- If you feel nauseated in your rooms.
- You have to change the air filter many times.
- If you find a lot of dusty streaks in duct connections and registers.
- You see some kinds of kinks and tangles in flexible ducts.
If you reckon there is a possibility of punctures in heated duct sealing here’s what all you will need
- Sheathing tape or a roll of metal
- A Pair of Scissors
- Expanding spray foam insulation
- Brush or Trowel
- Ladder (optional)
Procedure Of Heating Duct Sealing:
Step 1: Inspect the Heating Ducts
Most of the times, heating ducts happen to be simply disconnected. Before you start off with duct sealing make sure if it is just not a connection issue.
Step 2: Keep an eye for the leaks
The main reason for the dysfunction in the heating ducts is due to the presence of leaks. Turn on the cooling and heating system and after some time use your hand to feel the temperature difference.
Step 3: Seal the Deal
After you have located the leaks, find a foil tape or a mastic tape to cover these leaks. If you find gaps in the ducts, you can use spray foam to seal them. It is very necessary to clean the joint before putting on the mastic tape. Because there is the tape will not stick to the dust.
Step 4: Reinforcing the Mastic Tape
Use a mesh tape, to reinforce the mastic tape to ensure that it holds steady. The masting tapes should happen on the joints as they require more strength if they are to stay in place. Gaps larger than 0.25 inches require reinforcing as they cannot be firmly sealed using a mastic tape alone.
Step 5: Insulation of the ducts
Insulate the ducts to prevent more leakages, especially the ones in the crawl spaces. Ducts that are not insulated properly lead to leakages. Use an insulation material that is R-6 as it is strong enough to hold them together for longer.
If you do not want to go through all the hassle and cannot reach the insides of the ducts to seal them, you need to call a duct cleaning professional or type in duct sealing near me in your browser.
To get heated duct sealing, Mould Duct Cleaning anywhere across Melbourne. Call Toms duct cleaning Melbourne services on 1300 068 194. or search for duct cleaning services near me.